Драйвер на принтер hp 1000 mac

Драйвер на принтер hp 1000 mac

Home arrow News arrow Tech Tips arrow Printing to HP Laserjet 1000 in Mac OSX

Printing to HP Laserjet 1000 in Mac OSX

Here’s a workaround I discovered on how to use my HP Laserjet 1000 in Mac OSX 10.4.8 on my 17″ PowerBook G4. If you follow these instructions exactly, you should have no problems: To install the SDK Mono CUPS sample driver and connect it to an HP LaserJet 1000 via USB:

Click here to download the driver.

Ensure that the printer is connected to the system via USB and powered on.

Reboot the Mac system if the printer was connected after the last reboot.

Open the SDKMono.dmg driver file that you downloaded from the above link and extract and browse to the newly extracted volume in the Finder .

Execute MonoInstall.pkg file and complete the installation process.

Open System Preferences and select the Print & Fax icon.

Click the «Add» button while holding the ALT key. (This will delete all currently installed printers but will ensure a successful installation. You will have to install your other printers again later if desired.

Choose «hp LaserJet 1000» which should appear at the bottom of the list.

From the «Printer Model» pop-up menu choose «ESP»

From the list of models that appears below the Printer Model selection choose the «Zenographics SDK Mono CUPS v1.1» driver (bottom of the list), then click the «Add» button at the bottom of the dialog.

That’s should be it. You should now be able to print to your HP Laserjet 1000 from your Mac!

Источник

HP Deskjet 1000 Driver

The HP Deskjet 1000 driver was never meant to be a high-end printer. It was just made to meet the minor printing needs that a lot of people have. Also, it was to offer a cheaper alternative to some of the higher end versions out there. When you think about it though, it’s done a pretty good job at that.While in operation, the HP DeskJet 1000 consumes 10 Watts of power. That is the basic and conventional printer power consumption level, so you shouldn’t have issues with that.

HP Deskjet 1000 Printer Driver Downloads

Driver for Windows

Supported OS: Windows 10 32-bit, Windows 10 64-bit, Windows 8.1 32-bit, Windows 8.1 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows XP 32-bit
FilenameSizeDownload
Full Feature Drivers and Software for windows.exe46.49 MBDownload
Basic Driver for Windows XP Vista 7 8 8.1 and 10 32 bit.exe15.86 MB
Basic Driver for Windows Vista 7 8 8.1 and 10 64 bit.exe16.81 MB

Driver for Mac OS

Supported OS: macOS Sierra 10.12.x, Mac OS X Yosemite 10.10.x, Mac OS X Mavericks 10.9.x, Mac OS X Mountain Lion 10.8.x, Mac OS X Lion 10.7.x, Mac OS X Snow Leopard 10.6.x, Mac OS X Leopard 10.5.x
FilenameSizeDownload
Full Feature Drivers and Software for Mac OS X 10.8 to 10.12.dmg137.45 MBDownload
Full Feature Drivers and Software for Mac OS X 10.7.dmg110.83 MB
Full Feature Drivers and Software for Mac OS X 10.5 and 10.6.dmg81.80 MB

hp deskjet 1000 cartridge details

Black Ink HP 61Cartridge (

180 pages), HP 61 Tri-color Ink Cartridge (

150 pages), HP 61XL Black Ink Cartridge(

455 pages), HP 61XL Tri-color Ink Cartridge(

Specifications

The lack of Wi-Fi support definitely will hurt the case of HP 1000 printer. However, those who might not particularly need the functionality will find its connection range and strength to be satisfactory. The design of this printer is pretty compact. That means you won’t have any issues with space and placing it as well. It is not expected to consume too much space, so you can pretty much have it put anywhere.

The HP Deskjet 1000 driver can use on both Windows and Mac systems. At least, it has the operational versatility tag going on for it. Also, the requirements for this printer are pretty flexible. If you’re using a Windows system, then you will need to have Microsoft Windows Vista, Microsoft Windows XP, Windows SP2, or anything that comes after that. For Mac, you will need to have Apple MacOS X 10.5 or later to run HP 1000 printer seamlessly.

When it comes to printing, the speed of the HP Deskjet 1000 driver can categorize into black and white and color. When in black and white mode, it prints at 5.5 pages per minute usually and 16 pages per minute in draft mode. On the color mode, however, it prints four pages per minute in standard view and 12 pages in draft mode.

The HP Deskjet 1000 driver is highly versatile, as it works for both Windows and Mac-based systems. It has been especially favored for being able to work effectively, and for the excellent value for money that it provides. However, it is also worth knowing that the noise levels on HP printer DeskJet 1000 printer are also partly high. Regardless, just as it is with most inkjet printers, this is usually from peaks when new sheets can feed. Download HP Deskjet 1000 Printer – J110a driver from HP website

Источник

(Download) HP LaserJet 1000 Driver Download

The HP Laserjet 1000 printer is a portable, simple, and easy-to-use monochrome laser printer. HP LaserJet 1000 is ideal for your home and small business. Here you’ll find a proper guide on how to download HP LaserJet 1000 driver . Follow the instructions given below to download and install it.

  • Download Driver HP Laserjet 1000 for Windows XP (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows XP (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows Vista (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows Vista (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows 7 (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows 7 (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows 8, 8.1 (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows 8, 8.1 (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows 10, 11 (32 Bit) → Download
  • Download HP Laserjet 1000 basic driver for Windows 10, 11 (32 Bit) → Not Available
  • Download Driver HP Laserjet 1000 for Server 2000, 2003 (32Bit) →Download
  • Download Driver HP Laserjet 1000 for Server 2003 (64Bit) → Not Available
  • Check out this guide on how to install the above HP LaserJet 1000 basic driver manually.
  • HP LaserJet 1000 driver downloads for Windows 7, 8, 8.1, Windows 10 64 bit drivers are not available for download. You can use its alternate compatible driver. The alternate driver is HP Laserjet 3015. Click on the links below to download HP 3015 drivers.
    • Alternate Driver:Click here to download HP laserjet 3015 32bit driver.
    • Alternate Driver:Click here to download HP laserjet 3015 64bit driver.
  • HP LaserJet 1000 Host Based Driver for Windows XP → Download
  • HP LaserJet 1000 Software Update Windows XP → Download
  • HP LaserJet 1000 Printing Software Solution Windows XP → Download
  • Download HP Laserjet 1000 driver for Mac OS v10.0 to 10.15 → Not Available
  • Download HP Laserjet 1000 driver for Linux, Ubuntu → Not Available

Software for laser Printer HP 1000
My Computer Name is Fujitsu
Windows XP 2000 install 32 Bit

HP Laserjet 1000 Features

This printer offers you good quality print speed and fast output. We are providing 10 pages per min of print speed. This laser printer provides increased detail in prints with the resolution of 1,200 × 600 dpi. This compact printer has a USB port to communicate this printer with other portable devices like cameras, card-readers, phones etc.

This HP Laserjet 1000 printer also offers you a 7000 page monthly duty cycle. The high quality ink cartridges are used in this laserjet printer. This printer’s driver is compatible for Microsoft Windows XP, 2000, Server 2003, Windows 7, 8, 8.1, 10 32bit – 64bit.

Источник

domeheid

A personal blog and commonplace book by Christopher Whalen

Friday, 6 March 2015

How to install an HP LaserJet 1000 series printer on a Mac

This post will explain how I managed to install my 13-year-old HP LaserJet 1000 series printer on my MacBook Pro running OS X Yosemite version 10.10.2.

I feel like I’m on familiar territory here with HP’s lack of legacy support for peripherals such as scanners and printers. See my popular post on How to install an HP ScanJet 2200c scanner on Windows Vista.

That was 7 years ago.

I still have the same printer and scanner and I’m determined to make them work. And stick it to the man. Even though my dad works for HP. Especially because my dad works for HP.

It’s worth the rigmarole, not just for the money you will save by not having to buy a new printer, not just because you will be defeating HP’s selfish and wasteful (but understandable for business reasons) built-in obsolescence, but because it will make you feel like this:

I am hugely indebted to donthomaso’s post on the HP Support Forum thread download driver on mac 10.7.4 for HP Laserjet 1000, which linked to this set of instructions by The Daily Chu / chuck: HP Laserjet 1000/1005/1018/1020 on OS X Lion/Mountain Lion/Mavericks. Although I didn’t use them, these instructions for HP Laserjet 1000 on Mavericks also look pretty good and are a bit shorter than mine.

The main purpose of this post is not to take any credit but to make it easier for other users like me to find instructions that will work for them.

  1. cd Desktop (to change to your Desktop directory)
  2. wget http://foo2zjs.rkkda.com/foo2zjs.tar.gz (to download the compressed file)
  3. tar -xzvpf foo2zjs.tar.gz (to extract it)
  4. cd foo2zjs (to change into the newly extracted foo2zjs directory)
  5. make (to compile foo2zjs)
  6. ./getweb 1000 (to download the HP LaserJet 1000 firmware file)
  7. sudo make install (to install foo2zjs)
  8. sudo make install-hotplug (to configure hotplug)
  9. sudo make cups (to restart the spooler if you use CUPS — nope, I have no idea what that does either, but I did it anyway, even though it appears to be optional).

9) Add the printer via Printers & Scanners in System Preferences (type cmd + space and start typing Printers & Scanners), but do not close Terminal just yet. Click on the + then choose HP LaserJet 1000 and it should automatically load the HP Laserjet 1000 Footmatic/foo2zjs in the Use field.

10) Finally, reset your app download security settings to Mac App Store and identified developers and re-closing the lock icon as described at the end of step 6 above.

Update on 24 March 2015: I found that when trying to use the printer a second time, it didn’t work. I repeated some of the steps of the installation process, but I think the important part is running sudo make cups (step 8.9 above) to restart the spooler.

Update on 1 June 2017: Repeat steps 8.4 to 8.9 to get the printer to work again if you’ve already installed it.

77 comments:

Thanks Chris . that works for me after I was planning to throw out my old loved printer into the garbage.
Please keep posting you tips for us.

Hey. Thanks for your comment. Glad it worked for you! Another printer saved.

Thank you very much for tips.
Everything is ok except that the letters are not strongly . it seems like to be red colour and i print in black .
Any idea ?
Thanks again for your time

My HP LaserJet 1000 series is a monochrome printer. If yours is printing red, is there something wrong with your toner cartridge or are you using a different printer?

what I meant in my previous message is that although everything look ok and my HP LaserJet can print all document, all letters are faint black (as if I would tell it to print red letters).
Any ideas on that?
Thank you for your reply.

This sounds like more of a hardware than a software problem. Have you tried using a fresh ink cartridge? It sounds like you might be running low.

If the printer is powered off, the sihplOOO.dl file needs to be sent again.

I think that the sudo make install-hotplug is supposed to make that happen. but I’m not 100% sure.

Thanks, Anonymous! I’ll try that next time.

Thank you for this, I have tried to do this before but never succeed, I no longer need to open as PDF in preview, save to dropbox, go to my Windows XP laptop and print from there.

Thank you for making my day excellent.

sudo lp -oraw /usr/share/foo2zjs/firmware/sihplOOO.dl

sudo lp -oraw /usr/share/foo2zjs/firmware/sihp1000.dl

(for a laserjet 1000)

You’re welcome. Thanks for the update. I hadn’t noticed that mistyping of O for 0. I’ve made that change to step 9.

I’ve followed your instructions line by line above, but after part 8.3, I seem to get an error message in the terminal. Is there any other way to install the foo2zjs?

I installed foo2zjs this way:

I downloaded foo2zjs in my Chrome web browser from http://foo2zjs.rkkda.com/foo2zjs.tar.gz (which by default put it in my Downloads folder). I opened the zip file there by double clicking on it. I then typed cd in Terminal, added a space, and dragged the unzipped foo2zjs directory into the Terminal window to save me typing out the full path i.e. /Users/christopherwhalen/Downloads/foo2zjs where christopherwhalen is my Mac’s Home directory. Yours will be different, unless you’re also called Christopher Whalen (in which case, hi!). If you did it this way, you should now be in the foo2zjs directory, so skip to step 8.5 below.

After part 8.5, this is the error message that I get after I type in «make»:

***
*** Error: /usr/include/stdio.h is not installed!
***
*** Install Software Development (gcc) package
*** for Ubuntu: sudo apt-get install build-essential
***
make: *** [all-test] Error 1

And from there, its an Error 1 message

Sorry, I don’t know how to fix that.

I’m in trouble with the same error occurred in the task «make», have you found a solution to fix it ?

I would be grateful to you to inform me, thank you for your reply.

The solution to the above error that worked for me is the following (on Mojave 10.14 OS):

After the error message saying «Install Software Development (gcc) package», install XCode from App Store. Then from terminal install the command line tools, if not already installed with the XCode installation:

1. $ xcode-select —install

2. run $ make again — if the same error occurs then just give the audience what they want : manually copy the stdio.h from XCode installation directory to /usr/include/

For this it is necessary to find where is stdio.h already copied in XCode installation folder by running :

3. $ find /Applications/Xcode.app -path ‘*/usr/include/stdio.h’

You’ll get several folders which can be used as source.

Then execute
4. $ sudo mkdir /usr/include
to create the folder, if it is not already created

And finally
5. $ sudo cp /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/stdio.h /usr/include — the source folder is the output of the find command from the 3rd step

All this is necessary since the Makefile is configured in such a way that requires stdio.h in /usr/include, otherwise the error mentioned above is issued:

@if ! test -f /usr/include/stdio.h; then \
echo » ***»; \
echo » *** Error: /usr/include/stdio.h is not installed!»; \
echo » ***»; \
echo » *** Install Software Development (gcc) package»; \
echo » *** for Ubuntu: sudo apt-get install build-essential»; \
echo » ***»; \
exit 1; \
fi

So, to summarize, after the stdio.h was copied to /usr/include , running «make» returned no error in my case, so I could run all other subsequent steps. I can gratefully confirm that this post is still valid for 10.14 Mojave OSX.

Thanks again Cristopher, without you all our hp 1000 printers would be in the garbage by now.

W00t! Thanks so much for your detailed instructions, Roman. I’m delighted every time this post helps someone bring their printer back from the dead.

Hi! In Mojave, me, like some people int this tread and many over internet faced with printer only working with acrobat, bat no program else. Printing service showed ‘filter failed’ error. Found solution that may help others. To solve problem with «filter failed» in Mojave, you should: 1) copy somewhere file HP-LaserJet_1000.ppd.gz, which located in /usr/share/cups/model/ 2) unzip it. 3) edit resulting file HP-LaserJet_1000.ppd to remove lane «*cupsFilter: «application/vnd.cups-pdf 0 foomatic-rip»» 4) save this file 5)move it back to /usr/share/cups/model/ , without *gz archivation of file 6)remove from /usr/share/cups/model/ old archived file HP-LaserJet_1000.ppd.gz. 7) Delete your printer in «system preferences/printers and scanners» and add it again. For me it solved problem with «filter failed» on Mojave 10.14.6 Hackintosh. Checked printing from word/gimp/textedit/acrobat without any problems. Version of ghostscript 9.27|foomatic 4.0.6. Actual version of foo2zjs. If install foo2zjs from sources hot-plug works brilliant. Probably that way may help in Catalina too, have not checked.

I tried that and it did not work. I have done all the steps suggested by Chris on both Sierra and El Capitan and they seem to work because the printer is added and the driver is there but the «stopped- filter failed» always come up and I am unable to print. I found the .ppd file you mentioned in the foo2zjs folder that I downloaded and removed the (cupsFilter: «application/vnd.cups-pdf 0 foomatic-rip») and reinstalled but again, the same problem never goes away. What can be wrong?

Hi Chris,
I did all the steps, all worked fine, the problem in the Add window, the name of the Printer won’t appear. why?

The most obvious question is: is your printer plugged in at the wall and connected to your Mac by USB?

I really appreciate you taking the time to write this.

I followed all the steps to the letter. Even though I managed to install the printer through the OS X printers panel, all I get is a flashing orange light that won’t stop. Any clues into this?

Nope. Not sure what that’s about. Sorry. Is the flashing orange light on the printer or in OS X?

It worked! Tkanks!

Running Yosemite 10.10.5

Solved a problem

When I tried to print anything, I saw the file display in the Print Queue for a split-second, then nothing. I also noticed the Yellow light on the printer was blinking non-stop which means there’s a paper-jam, an open compartment or the toner cartridge is not seeded properly; so I opened and closed everything, re-seeded the toner cartridge, then unplugged the printer for 2 seconds, plugged it back in, and it worked! Amazing!

Thanks for the instructions!

Gene
Florida USA

I’m delighted it worked for you! Sticking it to the man…

I was tired to search and try how to install my HP LaserJet 1000 printer on OS lion, and I finally did it!

Hello Chris
I use Xcode Version 7.1 (7B91b) and OS X El Capitan Version 10.11.1 (15B42) . I cannot print with my hp . Are there any changes in your instructions ?
Thanks for your time

Hi. I haven’t tested it on El Capitan yet, so I don’t know if you need to do anything differently.

I had OS X Lion and these steps work, but recently I updated to El Capitan and now they no longer work anymore, I can’t install Ghostscript neither foo2zjs correctly. I think they are not compatible with El Capitan

Is it possible to solve the problem on ElCapiten with this ?
http://osxdaily.com/2015/10/05/disable-rootless-system-integrity-protection-mac-os-x/

Christopher, you are my hero! Thank you so much! You saved hours of my life and hundreds of nerve cells.

You’re very welcome, Olia! I’m glad it worked for you!

Trying to install the driver for HP LaserJet 1000 series
on my iMac with OS X El Capitan version 10.11.2
I installed :
Xcode Version version 7.2 (7C68)
MacPort OS X 10.11 El Capitan
Foomatic-RIP for Mac OS X 10.3.x (Panther) — Mac OS X 10.9.x (Mavericks)
Disable csrutil — see Anonymous Sunday, 15 November 2015
In System Preferences : Allow download from Anywhere — see Step 6)

At step 7), Install Ghostscript gplgs-8.71.dmg for Mac OS X 10.3.x (Panther) — Mac OS X 10.9.x (Mavericks)
I get Error message : installation failed , Setup was unable to install the software because it has not found the software to be installed

What happened ? Is Ghostscript 8.71 not compatible with OS X 10.11 ?
I find nothing about other Ghostscript version under http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomatic
Does anyone has a tip ?

Hi Claude. I’m not sure. Sorry. I’m not able to help diagnose problems with the process. I just shared what worked for me at the time on an older version of OS X.

try with installing ghostscript using brew: `brew install ghostscript`

I Christopher.
Thank you to take time to answer me. I will continue research on Ghostscript and if I find something new, I will make a comment on the blog.
Happy New Year

I am going through this protocol, and I am having the same issue: the installation of Ghostscript is failing. Have you found a solution? I am using macOS Sierra.

I am having the same issue with Ghostscript. It won’t install on macSierra. Have you found a solution?

After typing «make» to build the foo2zjs, I get this:
Phaoons-MacBook-Pro:foo2zjs Phaoon$ make
#
# Dependencies.
#
***
*** Error: /usr/include/stdio.h is not installed!
***
*** Install Software Development (gcc) package
*** for Ubuntu: sudo apt-get install build-essential
***
make: *** [all-test] Error 1
Phaoons-MacBook-Pro:foo2zjs Phaoon$

And I cannot proceed.

Sir, I was unable to get this to install properly. I get the following message:
After typing «make» to build the foo2zjs, I get this:
Phaoons-MacBook-Pro:foo2zjs Phaoon$ make
#
# Dependencies.
#
***
*** Error: /usr/include/stdio.h is not installed!
***
*** Install Software Development (gcc) package
*** for Ubuntu: sudo apt-get install build-essential
***
make: *** [all-test] Error. Is there any assistance that you can offer?

No, sorry. I can’t help with that.

Apple store message:
We could not complete your purchase.
Xcode can’t be installed on «Macintosh HD» because Mac OS X version 10.10.5 or later is required.
Is there another way to get XCode. I am running 10.7.5

You should be able to get older versions of Xcode at Apple Developer.

Thank you. I successfully got the Xcode version I needed from Apple Developer. I am now struck trying to get foo2zjs to unpack using Terminal. Do I need to get ‘wget’ before using Terminal?
I unzipped foo2zjs outside of Terminal but have not been able to get the driver to appear as «use» in Printers and Scans. It is greyed out so I know I need to use Terminal but when I am in the foo2zjs directory, Terminal reports the command ‘make’ (without ‘) is not found. Any suggestions?

Thank you. I successfully got the Xcode version I needed from Apple Developer. I am now struck trying to get foo2zjs to unpack using Terminal. Do I need to get ‘wget’ before using Terminal?
I unzipped foo2zjs outside of Terminal but have not been able to get the driver to appear as «use» in Printers and Scans. It is greyed out so I know I need to use Terminal but when I am in the foo2zjs directory, Terminal reports the command ‘make’ (without ‘) is not found. Any suggestions?

Do I need ‘wget’ to use Terminal for this?

Ok. I figured out I needed XCode Command Line Tools in addition to Xcode itself. I also got Mac Ports working. I followed all your sudo commands for terminal. Everything appeared to load correctly including installing the driver. I selected the printer as suggested and the default «use» driver.
Everything appeared as if it was working. However nothing was printed. Not .pdf files or TextEdit files. The printer dialogue box identifies the HP Laserjet 1000 and states «Printer Ready» data appears to be being writing to the print spooler but no printing is occurring!
I have a MacPro 2.1 running Lion 10.7.5
Please advise.

I got the Laserjet 1000 to print on this old Mac Pro. Just had to completely power down and restart making sure the printer was online.
Thanks a lot not I can finally dump Microsoft!

Hi Kim. I’m glad you figured it out for yourself and I’m delighted you’ve got your printer working!

Just to let you know, I just repeated this process on my Macbook (Early 2008) and the printer worked. Thanks again for all your support.

I’m getting an Error 71 when doing the sudo make install

Traviss-MacBook-Air:foo2zjs travisbaumann$ sudo make install
#
# Dependencies.
#
# . OK!
#
cd icc2ps; /Applications/Xcode.app/Contents/Developer/usr/bin/make all
make[1]: Nothing to be done for `all’.
cd osx-hotplug; /Applications/Xcode.app/Contents/Developer/usr/bin/make all
make[1]: Nothing to be done for `all’.
cd icc2ps; /Applications/Xcode.app/Contents/Developer/usr/bin/make man
make[1]: Nothing to be done for `man’.
cd osx-hotplug; /Applications/Xcode.app/Contents/Developer/usr/bin/make man
make[1]: Nothing to be done for `man’.

It is possible that certain products which can be built using this
software module might form inventions protected by patent rights in
some countries (e.g., by patents about arithmetic coding algorithms
owned by IBM and AT&T in the USA). Provision of this software by the
author does NOT include any licences for any patents. In those
countries where a patent licence is required for certain applications
of this software module, you will have to obtain such a licence
yourself.
#
# Installation Dependencies.
#
# . OK!
#
#
# Install driver, wrapper, and development tools
#
install -d /usr/bin
install: chmod 755 /usr/bin: Operation not permitted
install -c foo2zjs zjsdecode arm2hpdl foo2hp foo2xqx xqxdecode foo2lava lavadecode foo2qpdl qpdldecode opldecode foo2oak oakdecode foo2slx slxdecode foo2hiperc hipercdecode foo2hbpl2 hbpldecode gipddecode command2foo2lava-pjl foo2zjs-wrapper foo2oak-wrapper foo2hp2600-wrapper foo2xqx-wrapper foo2lava-wrapper foo2qpdl-wrapper foo2slx-wrapper foo2hiperc-wrapper foo2hbpl2-wrapper foo2zjs-pstops printer-profile /usr/bin/
install: /usr/bin//foo2zjs: Operation not permitted
make: *** [install-prog] Error 71
Traviss-MacBook-Air:foo2zjs travisbaumann$

Any help would be great.

Did you ever get a fix for this? I am getting the same error.

I will quote what user «Matt» wrote below on 23rd of July 2016, it applies in this case too for High Sierra :»all you have to do is make sure the Rootless System Integrity Protection is disabled and the instructions work fine for El Capitan users. To do this, restart your Mac in Recovery Mode (Restart while holding Command + ‘R’), go to Utility > Terminal. In terminal type csrutil disable and hit return. Then restart. «. It worked in my case, I had the same error on step 8.7 : sudo make install in foo2 directory. Hope it solved your problem too. Cheers ! Thanks Matt, Thanks Christopher for this post !

Chris, THANK YOU! Our office is tight on cash, but I needed a printer — found one in storage, the old HP Laserjet 1000 (3 of ’em, in fact — nobody else has found Windows or Mac drivers to continue using these things).

I used your guide yesterday, and over the course of a few hours, had everything installed. I could see the printer over USB, I could select the foo2zjs driver, etc. but I just could not print. I would get either a «Printer not connected» or «Unable to send data to the printer» error. I gave up, shut down my iMac (OS X 10.9.5) and went home, determined to give it another go in the morning.

SO this morning the same problem arose upon booting up the Mac. I had done the firmware upgrade to the printer yesterday that was recommended (though I think it gave me an error upon executing the terminal command), fyi.

I found someone in Apple Discussions who had discovered a link to HP Printer Drivers 3.1 (https://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US) and was in the process of downloading them (link here case it helps somone else, since this all appears to be voodoo anyway).

I had the bright idea to power cycle the printer (which involves yanking the power cord, as there is no power button on this thing). Would you believe — that was the problem? I am now printing, without having installed the HP 3.1 drivers (though I’m keeping them around just in case for the future).

Dude. You rock. Thanks SO much!

Thanks very much for your detailed comment. I’m pleased you managed to get your printers to work.

Источник

Читайте также  Зарядка от ноутбука hp где
Mac OS X Hints

Драйвер на принтер hp 1000 mac

Драйвер на принтер hp 1000 mac

Home arrow News arrow Tech Tips arrow Printing to HP Laserjet 1000 in Mac OSX

Printing to HP Laserjet 1000 in Mac OSX

Here’s a workaround I discovered on how to use my HP Laserjet 1000 in Mac OSX 10.4.8 on my 17″ PowerBook G4. If you follow these instructions exactly, you should have no problems: To install the SDK Mono CUPS sample driver and connect it to an HP LaserJet 1000 via USB:

Click here to download the driver.

Ensure that the printer is connected to the system via USB and powered on.

Reboot the Mac system if the printer was connected after the last reboot.

Open the SDKMono.dmg driver file that you downloaded from the above link and extract and browse to the newly extracted volume in the Finder .

Execute MonoInstall.pkg file and complete the installation process.

Open System Preferences and select the Print & Fax icon.

Click the «Add» button while holding the ALT key. (This will delete all currently installed printers but will ensure a successful installation. You will have to install your other printers again later if desired.

Choose «hp LaserJet 1000» which should appear at the bottom of the list.

From the «Printer Model» pop-up menu choose «ESP»

From the list of models that appears below the Printer Model selection choose the «Zenographics SDK Mono CUPS v1.1» driver (bottom of the list), then click the «Add» button at the bottom of the dialog.

That’s should be it. You should now be able to print to your HP Laserjet 1000 from your Mac!

Источник

(Download) HP LaserJet 1000 Driver Download

The HP Laserjet 1000 printer is a portable, simple, and easy-to-use monochrome laser printer. HP LaserJet 1000 is ideal for your home and small business. Here you’ll find a proper guide on how to download HP LaserJet 1000 driver . Follow the instructions given below to download and install it.

  • Download Driver HP Laserjet 1000 for Windows XP (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows XP (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows Vista (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows Vista (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows 7 (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows 7 (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows 8, 8.1 (32 Bit) → Download
  • Download HP Laserjet 1000 driver for Windows 8, 8.1 (64 Bit) → Not Available
  • Download HP Laserjet 1000 basic INF driver for Windows 10, 11 (32 Bit) → Download
  • Download HP Laserjet 1000 basic driver for Windows 10, 11 (32 Bit) → Not Available
  • Download Driver HP Laserjet 1000 for Server 2000, 2003 (32Bit) →Download
  • Download Driver HP Laserjet 1000 for Server 2003 (64Bit) → Not Available
  • Check out this guide on how to install the above HP LaserJet 1000 basic driver manually.
  • HP LaserJet 1000 driver downloads for Windows 7, 8, 8.1, Windows 10 64 bit drivers are not available for download. You can use its alternate compatible driver. The alternate driver is HP Laserjet 3015. Click on the links below to download HP 3015 drivers.
    • Alternate Driver:Click here to download HP laserjet 3015 32bit driver.
    • Alternate Driver:Click here to download HP laserjet 3015 64bit driver.
  • HP LaserJet 1000 Host Based Driver for Windows XP → Download
  • HP LaserJet 1000 Software Update Windows XP → Download
  • HP LaserJet 1000 Printing Software Solution Windows XP → Download
  • Download HP Laserjet 1000 driver for Mac OS v10.0 to 10.15 → Not Available
  • Download HP Laserjet 1000 driver for Linux, Ubuntu → Not Available
Читайте также  Как переустановить систему на ноутбуке hp windows 10

Software for laser Printer HP 1000
My Computer Name is Fujitsu
Windows XP 2000 install 32 Bit

HP Laserjet 1000 Features

This printer offers you good quality print speed and fast output. We are providing 10 pages per min of print speed. This laser printer provides increased detail in prints with the resolution of 1,200 × 600 dpi. This compact printer has a USB port to communicate this printer with other portable devices like cameras, card-readers, phones etc.

This HP Laserjet 1000 printer also offers you a 7000 page monthly duty cycle. The high quality ink cartridges are used in this laserjet printer. This printer’s driver is compatible for Microsoft Windows XP, 2000, Server 2003, Windows 7, 8, 8.1, 10 32bit – 64bit.

Источник

Драйвер для HP LaserJet 1000

Windows XP — базовый драйвер

Варианты разрядности: x32/x64

Размер драйвера: 4 MB

Нажмите для скачивания: HP LaserJet 1000

Этот драйвер устанавливается вручную, чтобы сделать установку читайте нашу подробную статью.

Как установить драйвер в Windows и другие

Принтер HP LaserJet 1000 был выпущен около 20 лет назад. Но за счет его высокого качества и надежности, до сих его можно встретить во многих офисах и домах. Люди меняют компьютер, но свое привычное и удобное печатное устройство оставляют. Но если подключить устройство к новому компьютеру, сразу начать на нем печатать не получится. Требуются установить дистрибутив, а в этом вопросе возникают трудности. Производитель оборудования перестал выпускать драйвера для этой модели для новых операционных систем, поэтому стандартная установка не помогает. Из данной статьи вы узнаете, как решить проблему отсутствия программного обеспечения и обойти ограничения. Сначала вам надо скачать драйвер HP LaserJet 1000, который находится вверху страницы. При сохранении лучше всего укажите место загрузки – рабочий стол. Так вам будет проще.

Читайте также  Как сделать чистку печатающей головки принтер hp

Сверните все окна, если они у вас отрыты, чтобы увидеть скаченный файл. Нажмите по нему правой кнопкой мышки, чтобы появилось выпадающее меню. В нем выберете «Свойства».

Откроется окно свойств. Перейдите в нем во вкладку «Совместимость». В разделе «Режим совместимости» из выпадающего списка выберете «Windows XP (пакет обновления 3)» или «Windows Vista (пакет обновления 2). Также поставьте галочку около фразы «Запускать эту программу …». Нажмите «Применить», потом на «Ок».

Теперь следует запустить драйвер. Нажмите «Next» и следом «Finish». Принтер не установится, но файлы распакуются и сохраняться в нужном нам месте. Теперь надо зайти в Панель управления, нажать в ней на «Устройства и принтеры» и в верхней части окна нажать на кнопку «Добавить принтер».

Выполняем то, что просит установщик:

  1. Жмем «Установить локальный принтер»
  2. Порт не меняем и просто переходим на новый шаг.
  3. Выбираем нужную модель принтера. В окошке производителя находим HP, нажимаем и после этого во втором окошке ищем модель. Если повезет найти LJ1000 нажмите на нее и на «Далее».
  4. Если вашей модели в списке нет нажмите «Установить с диска».
  5. Указываем путь к папке, в которую распаковались файлы драйвера.
  6. Находим там файл HPLJ1000.inf и нажимаем на него.
  7. Жмем «Далее».
  8. Жмем «Для локального доступа».
  9. И на «Готово».

Если ваша ОС система имеет разрядность 32, то после таких действий все должно заработать. Если разрядность 64, данный способ не поможет. Потребуется ставить виртуальную машину, и печатать из нее. Узнать, как выполнить эту работу, можно по данной ссылке.

Вот несколько видео, как ещё можно сделать установку этого устройства на разные системы Windws 10, Windows 8 и Windows 7.

Источник

Драйвер для HP LaserJet 1000

HP LaserJet 1000

Едва ли производители из HP рассчитывали, что принтер HP LaserJet 1000 окажется настолько качественным и надёжным. Выпущенный почти 20 лет назад каждый отдельный образец даже со значительным числом ремонтов, продолжает свою службу. И вот что забавно – принтер рабочий, но «морально устаревший». Поэтому драйвера для этого принтера перестали выпускаться. И чтобы установить его на Windows 7 нужно искать «обходные пути». Рассмотрим эти самые пути. Ниже мы подробно расскажем, как подключить это устройство к компьютеру с Windows XP/7/8/10. Но надо будет использовать программу, для работы в новых версиях Windows — 8-10.

Windows XP

Подготовка к установке на Windows 7 x32

Скачайте драйвер по ссылке выше, нажмите на него правой кнопкой мыши и выберете «Свойства».

Перейдите во вкладку «Совместимость» и укажите параметры — «Windows XP (пакет обновления 3)» и жмите «ОК».

Windows 7 – когда х32 неплохо

Запустите файл, который вы скачали, нажмите «Next» и потом «Finish».

Полноценная установка не произойдёт. Она прервётся в начале самого процесса. Но нас интересуют именно распакованные файлы. Поэтому переходим в раздел «Устройства и принтеры» и нажимаем «Добавить принтер»(вверху).

  1. Выбираем «Установить локальный принтер».
  2. Порт оставляем без изменений.
  3. Выбираем производителя HP и ищем нужный принтер. Если повезёт удастся найти HP LJ1000 и достаточно будет нажать «Далее».
  4. В противном случае нажимаем «Установить с диска».
  5. Переходим по пути, который мы запоминали раньше. Нужно попасть в папку с распакованным файлами.
  6. Выбираем HPLJ1000.inf
  7. Нажимаем «далее» и выбираем «для локального доступа».
  8. Теперь потребуется нажать «готово».
Читайте также  Зарядка от ноутбука hp где

Установка завершена и принтер готов к работе. Просто приступаем к использованию, предварительно его подключив.

Windows 7 х64 и Windows 8 – виртуальная машина

Если для 32 разрядной системы решение довольно простое, то для 64 разрядной установка является проблемой. Увы, драйвер не подходит. Поэтому потребуется настроить виртуальную машину с 32 разрядной системой и печатать уже из неё. Видео поможет разобраться во всех хитросплетениях. Полная инструкция занимает слишком много места и довольно сложна в описании. Поэтому стоит ознакомиться с:

Настройкой печати через Virtual Box

Настройкой печати через XP mode

Источник

HP LaserJet 1000 and Mac

g-boac

macrumors 6502

Has anybody installed an HP LaserJet 1000? I’m trying to do so onto an iMac, but not having any luck.

Been to the HP website and searched for drivers; they only show Windows drivers available for download. I downloaded some sort of generic program from HP, «HP LaserJet for Mac v5.5.2». It ran and installed some sort of stuff onto my Mac, and the Mac physically recognizes and identifies the LaserJet 1000 by name when I am in >System Preferences >Print and Fax > + [«add printers»], but the «Print Using» dialog box just reads «Please select a driver or printer model».

Auto Select does not work, and if I search through the list of built-in printers in Leopard (. >Print Using: >»Select a driver to use. «), a bunch of HP LaserJet models are listed, starting with the 1010 and incrementing upward. But no HP 1000.

Anybody successfully installed or using the HP LJ 1000?

ingenious

macrumors 68000

Has anybody installed an HP LaserJet 1000? I’m trying to do so onto an iMac, but not having any luck.

Been to the HP website and searched for drivers; they only show Windows drivers available for download. I downloaded some sort of generic program from HP, «HP LaserJet for Mac v5.5.2». It ran and installed some sort of stuff onto my Mac, and the Mac physically recognizes and identifies the LaserJet 1000 by name when I am in >System Preferences >Print and Fax > + [«add printers»], but the «Print Using» dialog box just reads «Please select a driver or printer model».

Auto Select does not work, and if I search through the list of built-in printers in Leopard (. >Print Using: >»Select a driver to use. «), a bunch of HP LaserJet models are listed, starting with the 1010 and incrementing upward. But no HP 1000.

Anybody successfully installed or using the HP LJ 1000?

Have you tried downloading updated GutenPrint drivers? It’s an open-source driver package that might include what you’re looking for.

Источник

Mac OS X Hints
Adblock
detector